In our life, we will inevitably encounter some problems when using stainless steel bridge. What should we pay attention to when installing stainless steel bridge? We should pay attention to its safety when installing it. The precautions for installing stainless steel bridge are as follows:

不锈钢桥架

Stainless steel bridge

1:检查外观

1: Check appearance

在安装之前需要先检查下不锈钢桥架的外观，看下表面是不是平整光滑，不要出现掉漆的情况，同时看下钢材之间的焊接是不是结实。

Before installation, it is necessary to check the appearance of the stainless steel bridge to see whether the lower surface is flat and smooth without paint falling off, and whether the welding between steels is solid.

2：检查距离

2: Check distance

不锈钢桥架的安装要确定好具体的位置，同时各个层之间要留距离，同时如果有其他的管道平行着，要保证规定的距离，避免互相干扰。

The specific position of the stainless steel bridge shall be determined, and the distance between each layer shall be reserved. At the same time, if there are other pipes parallel, the specified distance shall be ensured to avoid mutual interference.

3：安全

3: Security

不锈钢桥架的安装不管是采用固定的还是悬挂的，都一定要看好各个部件之间连接的是不是紧固，不能有松动的现象，保证施工安全。

The installation of stainless steel bridge, whether fixed or suspended, must be sure to check whether the connection between various parts is tight, and there should be no looseness, so as to ensure construction safety.

以上就是为大家介绍的有关电缆桥架的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务

The above is a detailed introduction about cable tray for you. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service